Efitment E006, User Manual

Page: 12 / 12

EXERCISE COMPUTER INSTRUCTIONS
SPECIFICATIONS:
TIME
……………………………………………………….00:00-99:59
SPEED(SPD)..
………………………………………… 0.0-99.9ML/H
DISTANCE(DIST)
………………………………………0.00-999.9ML
CALORIE(CAL)
…………………………………………0.00-9999KCAL
ODOMETER(ODO)
…………………………..………0.0-9999ML
PULSE (PUL)
……...................................................0
，
40~240BPM
KEY FUNCTIONS:
MODE: Press to select a function
SET: Press to preset value for
“TIME”, “DISTANCE”, “CALORIES”, or “PULSE”.
CLEAR(RESET): Press to clear the value
OPERATION PROCEDURES:
1. AUTO ON/OFF

To turn on the meter, start pedaling or press any key.

After approximately 4 minutes of inactivity, the monitor will turn off.
2. RESET
The unit can be reset by either changing battery or pressing and holding the MODE key for 3 seconds.
FUNCTIONS:
1. TIME: The total working time will be shown when starting exercise.
2. SPEED: The current speed will be shown.
3. DISTANCE : The distance of each workout will be displayed.
4. CALORIE: The calorie burned will be displayed when starting exercise.
5. ODOMETER : The total accumulated distance will be shown.
6. PULSE : Press the MODE key until the pointer advance to PULSE . Place the palms of your hands on
both of the contact pads(or put ear-clip to ear),and wait for 30 seconds for the most accurate reading.
User
’s current heart rate will be displayed in beats per minute.
SCAN: Continuously displays each function in sequence for 4 seconds at a time.
COUNTDOWN FUNCTION
You can preset values to countdown TIME, CALORIES or DISTANCE. Press MODE until the
function you want is displayed. Make sure meter is not in SCAN. Press SET to increase the
value.
Start pedaling and the meter will countdown.
BATTERY: If there is a problem with the display, try changing the batteries first.
11
Version 1.1