Titanium Ti60 F225 Development Kit User Guide
Read SD Card Information
1.
Connect USB port J12 to the computer.
2.
Open a terminal software on the computer. You can use any Windows or Linux terminal
applications such as, PuTTy, Tera Term, Minicom, and others.
3.
Select the available USB com port and set the following:
•
Baud rate: 115200
•
Data: 8-bi
•
Parity bit: No
•
Stop bit: 1
4.
Insert the SD card and press pushbutton SW6. The SD card test starts.
5.
If the test passed, LED D17 lights up green, and the console displays the SD Card
information.
--- EFX-SD Card Demo---
Initialize...Loop: 0
Reponse: 0x40FF8000
Reponse: 0x40FF8000
Reponse: 0x40FF8000
Done
************START SD Card TEST************
**SD CLOCK SPEED = 50000
**CARD SPEED = 25000 kHz
**CARD SIZE = 15080 Mbyte Total BLOCK = 30883840
**SD BUS WIDTH = 4
**BLOCK SIZE = 512 BUFFER OF BLOCK = 256
**TEST SIZE - 128 kbyte
******************************************
6.
If the test failed or there is no SD card inserted in the slot, LED D17 lights up red.
--- EFX-SD Card Demo---
Initialize...Loop: 0
Reponse: 0x0
Reponse: 0x0
Reponse: 0x0
Reponse: 0x0
Reponse: 0x0
Loop: 1
Reponse: 0x0
Reponse: 0x0
Reponse: 0x0
Reponse: 0x0
Reponse: 0x0
Err: ACMD41 OCR BUSY!
SD Initial Error
Creating Your Own Design
The Titanium Ti60 F225 Development Board allows you to create and explore designs for the
Ti60 device. Efinix
®
provides example code and designs to help you get started:
•
Our Support Center (
) includes examples targeting the
board.
•
The Efinity
®
software includes also example designs that you can use as a starting point
for your own project, and includes a step-by-step tutorial.
www.efinixinc.com
43
