Titanium Ti60 F225 Development Kit User Guide
Setting up the Board
Installing Standoffs
Before using the board, attach the standoffs with the screws provided in the kit.
Warning:
You can damage the board if you over tighten the screws. Tighten all screws to a torque
between 4 ± 0.5 kgf/cm and 5 ± 0.5 kgf/cm.
Attaching the MIPI and LVDS Expansion
Daughter Card
The Titanium Ti60 F225 Development BoardTitanium Ti60 F225 Development Board
supports an expansion daughter card that fans out the GPIO.
Figure 9: Attaching MIPI and LVDS Expansion Daughter Card
Power
Supply
MIPI and LVDS
Expansion Card
P1
P3
P2
To connect the daughter card:
1.
Remove power from the Titanium Ti60 F225 Development BoardTitanium Ti60 F225
Development Board.
2.
Attach standoffs to the GPIO daughter card.
3.
Attach the daughter card to one of the multi-purpose high-speed interface 40-pin headers
on the board.
4.
Connect any cables to the GPIO as needed for your application.
5.
Power up the Titanium Ti60 F225 Development BoardTitanium Ti60 F225 Development
Board.
www.efinixinc.com
35
