EFI EB-34 Installation And Service Manual Download Page 75

Page: 75 / 117

Installation and Service Guide: Printer Controller EB-34

Performing Backup and Restore

Backup recommendations

Even though the server maintains a backup you can use for recovery of the factory installation, creating a separate

backup provides the ability to retrieve customized settings and job information if a recent backup is needed. You can

create a backup by using Command WorkStation, WebTools (including Fiery System Restore), or Fiery System

Installer.

•

To create a backup using Command WorkStation, or from a a remote location using WebTools, see

“Backing up the

system configuration”

on page 76.

•

To create a backup using Fiery System Restore, see

“Using Fiery System Restore”

on page 78.

•

To create a backup using Fiery System Installer, see

“Using Fiery System Installer”

on page 80.

Fiery System Restore in
WebTools:

Home

Tab >

Fiery System Restore
(Schedule automatic
backup)

Customized image,
automatically backed up.
Includes same content as
manually-backed up
customized image (described
in previous row).

Non-bootable image
only.

Internal hard drive.

•

Fiery System
Restore

•

Fiery System
Installer

Fiery System Installer on
DVD:

Fiery System Installer

Backup Hard Disk Drive(s)

Customized image, manually
backed up. Includes contents
of C drive (except for items
excluded by standard
Windows back up process,
such as items in recycle bin).
Includes software updates
and current configuration
settings.

If jobs option is selected, also
includes print jobs, job log,
and job settings (such as
paper size).

Can create a
bootable or non-
bootable image.

Bootable image: USB
device only.

Non-bootable image:
Network location,
local folder, external
hard disk, or USB
device.

•

If bootable,
can restore
directly from
image

•

Fiery System
Restore (can
restore images
that include
print job
information)

•

Fiery System
Installer

Additional Fiery System
Installer option: A factory
default backup image is
included on the EB-34 hard
disk (Restore from recovery
partition).

Factory default image.
Includes factory default
version of software and
configuration settings.

Does not include print job
information (print jobs, job
logs, and job settings).

If the hard disk is still
viable, System
Software 1 DVD can
boot from this
factory default
image.

Included as part of
original system
image. If the hard
disk is crashed, this
image is not
accessible.

•

Fiery System
Installer

Backup method

Description of backup
image

Bootable option

Possible destination

Restore method

Summary of Contents for EB-34






















































































































Search results

Summary of Contents for EB-34

Reviews:

Related manuals for EB-34

Brands by name

Popular brands

EFI EB-34, Installation And Service Manual

Search results

Summary of Contents for EB-34

Reviews:

Related manuals for EB-34

Brands by name

Popular brands