S
ETTING
UP
FROM
THE
C
OPIER
C
ONTROL
P
ANEL
23
S
ETTING
UP
FROM
THE
C
OPIER
C
ONTROL
P
ANEL
After you start the E-42B the first time, or install system software, you must set up the E-42B.
If you do not, the default settings are used. Make sure that settings are appropriate for your
printing environment. If your network or printing environment changes, you may need to
adjust your settings.
Set up from the copier control panel
Perform initial Setup from the copier control panel. After initial Setup, you can change
options from a client computer.
Set up from a client computer
After you perform initial Setup from the copier control panel, you can change most options
from a network computer using Configure (see
).
If you are setting up the E-42B for the first time, you can use the Fiery Setup Wizard to
configure language, regional, server, and print environment settings. For more information,
see
.
Using the copier control panel
You can use the copier control panel to access menu tabs and the Setup feature. For more
information about menu tabs, see
Access Setup
You can access the Setup feature from the copier control panel. When you set up the E-42B,
make sure that it is not printing or processing files.
T
O
ACCESS
SETUP
1 On the copier control panel, press Home.
2 Press the Fiery icon.
3 Make sure that the E-42B is Idle.
4 Tap the Fiery tab.
5 Tap Setup.
6 Log on with Administrator privileges.
