S
ETTING
UP
FROM
THE
C
OPIER
C
ONTROL
P
ANEL
24
Menu tabs
In addition to performing Setup, the copier control panel allows you to view status
information about jobs printed to the E-42B, print system pages, and set up printing.
The menu provides many of the same options available from Command WorkStation. For
information about the job management features, see
Utilities
.
Main tab
The Main tab is displayed as the starting point. It summarizes held and printed jobs, displays
paper tray status, and other information.
PrintMe tab
The PrintMe tab allows you to submit print jobs using Document IDs if you have a PrintMe
subscription.
N
OTE
:
PrintMe cloud printing must be enabled in Configure for the PrintMe tab to display in
the menu.
Job List tab
The Job List tab provides access to jobs according to the status of the job, similar to the Active
and Printed Jobs windows in Command WorkStation.
To change from one list to another, press the tab at the bottom of the copier control panel.
Suspend Printing
Suspend print activity between the E-42B and the copier/printer. Use this command to
interrupt the current E-42B job so that you can perform maintenance tasks. Jobs continue
to process on the E-42B. After you complete maintenance, choose Resume Printing to
continue printing jobs from the E-42B.
Resume Printing
Resume print activity between the copier/printer and the E-42B after you select Suspend
Printing.
Start Sample
Print
Print extra pages to an easily accessible output tray during a long print job, to verify that the
copier/printer is performing as expected.
Active
Jobs currently waiting to print.
Held
Held jobs.
Printed
Printed jobs.
Secure
Allows you to log on to display secure print jobs.
