www.effilux.com
4/6
USER MANUAL EN EFFI-FLEX-LG-CGX V1.0.2022
OPTICAL FLEXIBILITY
P0
P1
P2
P3
By using polarizers, on the Effilux light and on the camera, it is possible to eliminate glare from your workpiece making it easier to
acquire a suitable image for the application. The user can insert directly the polarizer
EFFO-FLEX-POL
inside the EFFI-Flex-LG, under
the window.
Important note
:
- The polarization is optimal with a
LD
window
, the use of SD or OP window can
depolarize the light.
Unscrew the M4 screws and
remove the cap
Slide out the window and all lenses
Place the lenses & window in
desired configuration
The EFFI-Flex-LG offers flexible lens positioning to control the beam angle and different type of
diffusers to adapt the uniformity. The user can easily change the diffuser and the lens position.
How to change the optical configuration?
How to install a polarizer accessory?
Open the EFFI-Flex-LG and insert
the LD window
Insert the polarizer under the LD
window
Close the product
Be careful to always open the product from the side without the connector.
MECHANICAL CONSIDERATION
IP rating
IP5X
Dimensions
60mm x 47mm x Length = Optical 35mm
Fixing
One T-slot on the back for M6 T-nuts 8mm slot (2x M6 T-nuts included)
Connector configuration
(OUTPUT connector with the same pinout specification than INPUT connector)
Optical length of the product
INPUT Connector
OUTPUT Connector
200mm 400mm 600mm 800mm
1000mm 1200mm 1400mm
1x M12 - 5 pins male
1x M12 - 5 pins female
4
2
X
X
X
X
X
1x M12P - 4 pins male
1x M12P - 4 pins female female
14
7
4
3
2
2
2
