30
CIP/1483 Driver Installation
Efficient Networks, Inc.
5-a
In the browse list, double-click on the CD-ROM drive letter,
then select the
W95-98
folder and
Cip-1483
and click
OK
.
5-b
Click
Next
on the Add New Hardware Wizard dialog box.
6
The Add New Hardware Wizard states that “
Windows is now ready to
install the best driver for this device.
” Click
Next
. Windows will then
copy the driver files from your CD-ROM.
7
Next you may see the
Insert Disk
dialog box. Click
OK
.
8
On the
Copying Files
dialog box, pull down the “
Copy files from:
”
list and select
<drive>: W95-98\Cip-1483
. Click
OK
.
9
Next, configuration dialog boxes will be presented. Use your service
provider’s instructions to set the parameters. Click the
Finish
button
to complete the configuration.
As the files are being copied, you may be prompted for the Windows
98 CD. If so, insert the CD and click
OK
.
10
Click the
Finish
button to complete the configuration. When the
driver installation is complete, you will be prompted to restart
Windows. Click
Yes
.
11
When the system comes back up, you may need to configure the
Internet Protocol (IP) address for your connection. Refer to the
procedure below.
Configuring the IP Address in
Windows 95/98
When using the CIP/1483 driver, you may need to configure an Internet
Protocol (IP) address that will be used to identify your computer on the
network.