Efficient Networks, Inc.
Installing PPP Software
15
7
When the system comes back up, one or more configuration dialog
boxes may or may not be presented, depending on your service
provider. Configure the settings as directed by your network service
provider. When configuration is complete, if prompted to restart
Windows, click
Yes
.
8
When the system comes back up, you will need to set up your PPP
dial-up connection as described on page 22.
Troubleshooting Windows 95
Installation
Recovery from Canceling Installation
An incomplete installation may occur if:
•
In Windows 95 or 95A, if you select
Do not install a driver
on the
New
Hardware Found
dialog box
•
In Windows 95B, if you click
Finish
on the
Update Device Driver
Wizard
dialog box without inserting the SpeedStream installation CD
Use the following procedure to clear the partial install from the system.
1
Click
Start
and point to
Settings
; then click
Control Panel
.
Double-click
System
and click the
Device Manager
tab. Select the
ENI card under “*
Other devices
”.
2
Click
Remove
. Exit the Device Manager and reboot the machine.
3
Shut down and restart the system; then perform the software
installation procedure again.
PPP Driver Installation without Dial-Up Networking
If the drivers are installed on a system that does not have the latest version
of DUN installed, the installation procedure describes what will occur. If
the system is not restarted as required during DUN installation, the
installation software will not be able to create address book entries. To
recover from this situation, use the following procedure to update the
service profile: