Electronic device DMU2000 - DMU3000 - DMU3000 PLUS
THE POWER OF PERFORMANCE
Electronic device DMU2000 - DMU3000 - DMU3000 PLUS
1
0
4
7
1
3
2
CHECK
Check that the error state disappears and a pressure value of about 135 appears on computer when
carrying out the electric by-pass on transducer connecting cable, as outlined in Chapter 17 (This check
is equivalent to connecting a new transducer electrically only, without inserting it into cylinder, and
you should read a pressure value of 0 bar).
SOLUTION
Replace the pressure transducer
!
FAILURE ANALYSIS
If the computer is connected to crane (tools
sensor diagnostics
DMU hardware) the error
state is displayed:
-
“1”
appears next to:
“pressure sensor damaged (0 bar)
CHECK
Check that the error state disappears and a pressure value of about 135 appears on computer when
carrying out the electric by-pass on transducer connecting cable, as outlined in Chapter 17 (This check
is equivalent to connecting a new transducer electrically only, without inserting it into cylinder, and
you should read a pressure value of 0 bar). If the error state continues, the pressure sensor connecting
cable is damaged.
SOLUTION
Restore electric connection between DMU and pressure transducer.
Summary of Contents for DMU 2000
Page 71: ......
