User Manual
12
4.2 Mounting the Inverter
Dimensions of wall bracket:
Figure 4.3 Inverter wall mounting
Please see Figure 4.4 and Figure 4.5 for instruction on mounting the inverter.
The inverter shall be mounted vertically. The steps to mount the inverter are listed below:
1. According to the figure 4.2, select the mounting height of the bracket and mark the
mounting holes. For brick walls, the position of the holes should be suitable for the
expansion bolts.
Figure 4.4 Inverter wall mounting
2. Make sure the bracket is horizontal and the mounting holes (in Figure 4.4 ) are marked
correctly. Drill the holes into the wall or pillar at your marks.
3. Use the suitable screws to fix the bracket to the wall.
WARNING:
The inverter must be mounted vertically.
4.Lift up the inverter (be careful to avoid body strain), and align the back bracket on the
inverter with the convex section of the mounting bracket. Hang the inverter on the mounting
bracket and make sure the inverter is secure (see Figure 4.5).
