effeff 495-107, Operating Instructions Manual

Page: 10 / 24

10
Changing the master code
L L
Actuate the system by pressing button “
E
” on the key pad. The green
LED will flash twice.
L L
Enter the old master code.
L L
Press button “
P
” to actuate programming mode.
L L
Enter the new master code with a minimum of 2 and maximum
number of 6 digits.
L L
Confirm entry by pressing the button “
P
”. This switches off the
programming mode.
Example:
E 1234 P 4321 P
= new mastercode E 4321
Entering the mastercode also opens the door and allows access to the
programming mode.
Programming of user codes
The system can accept 3 additional codes besides the master. Each
user code is programmed into the system in one of these programming
slots 1P, 2P or 3P.
The first digit of a user code must never be identical with the first digit
of the master code ! Failure to observe this means that a complete
reset of all codes is necessary see “Error reset”. All programming has
to be done again.
L L
Actuate the system by pressing button “
E
” on the key pad. The green
LED will flash twice.
L L
Enter the master code.
L L
Press button “
P
” to actuate programming mode.
L L
To enter the programming slot press either 1P ...
2P ...
3P ...
L L
Enter the desired code with a maximum of 6 digits.
L L
Press button “
P
” and the code is accepted and programming mode is
switched off.
Programming of all the codes is done in the same manor.
Examples:
E 4321 P 1 P 78493 P
= 1st usercode E 78493
E 4321 P 2 P 539 P
=2nd usercode E 539
E 4321 P 3 P 7431 P
=3rd usercode E 7431
Operation of the code lock
(maximum entry time 13 secs.)
L L
Switching-on of operational standby mode by actuating the key “
E
”
on the membrane keypad.
The green LED indicator will flash on briefly twice, indicating entry
standby.
L L
Entering one of the valid code numbers.
L L
The door handle is engaged for actuation for 3 seconds (in order to
open the door). During the door unlocking period the door handle can
be actuated only once.
If the door unlocking period of 3 seconds has expired without the door
having been opened, the door handle disengages (freerun).