SETTINGS
SETTINGS
15
16
9. Control
On the back of the
ecosocket
there are two dials for setting the radio frequency of the socket.
The monitor needs to know this radio frequency in order to connect to each socket.The first dial
shows letters A-H and the second dial shows numbers 1-8, meaning you can set the socket
at any one of 64 different frequencies. If you want to control multiple
ecosockets
at the same
time, set the dials on the back to the same frequency.
In the Control section of the settings menu, you are prompted to “Set Appliances Address”,
and Appliance A will start to flash. Use the
up
and
down
buttons to enter the radio frequency
that you have set on the
ecosocket
and press the
set
button to move onto the next appliance.
Press
exit
at any time to save your settings and go back to the menu. Your
ecotouch
monitor
should now be linked to your
ecosocket
.
7. Temperature
The temperature is shown in the top right hand
corner of the screen and toggles between ˚C
and ˚F. The default temperature in Australia is
˚C. Press
set
to choose the temperature.
8. Currency
To select the currency use the up and down
and set buttons. The chosen currency will be
used for all cost values displayed on the device.
The default value is $.
TEMPERATURE AND CURRENCY
CONTROL
EXIT
EXIT
EXIT
EXIT
$
Radio
Frequency
EXIT
A = A1
Set Appliances Address
EXIT
