![background image](http://html1.mh-extra.com/html/efco/tpm-a22fp/tpm-a22fp_user-manual_2366942014.webp)
8
Indu
st
rial
T
ouch Moni
tor
/Disp
la
y
TP
M
-A2
2
FP
3.2 VESA Mount for Your Monitor
This monitor conforms to the VESA Flat Panel Mounting Physical Mounting Interface
standard which defines a physical mounting interface for flat panel monitors, and
corresponding with the standards of flat panel monitor mounting devices, such as
wall and table arms. The VESA mounting interface is located on the back of your
monitor.
To mount the monitor on a UL certified swing arm or other mounting fixture, follow
the instructions included with the mounting fixture to be used.
Photo_4 – VESA Mounting Interface
Please select the proper screws!
The distance between the back-cover surface and the bottom of the
screw hole is 8 mm. Please use four M4 screws diameter with proper
length to mount your monitor.
Please note: the mounting stand must be able to support at least 17.6 lbs
(8Kg).
Summary of Contents for TPM-A22FP
