background image

57

Italiano

English

Français

CERTIFICATO DI GARANZIA

WARRANTY CERTIFICATE

CERTIFICAT DE GARANTIE

Questa macchina è stata concepita e realizzata attraverso le più moderne 

tecniche produttive. La Ditta costruttrice garantisce i propri prodotti per un 

periodo di 24 mesi dalla data di acquisto per utilizzo privato e hobbistico. La 

garanzia è limitata a 12 mesi in caso di uso professionale.

Condizioni generali di garanzia 
  1) La garanzia viene riconosciuta a partire dalla data d'acquisto. La Ditta 

costruttrice tramite la rete di vendita ed assistenza tecnica sostituisce 

gratuitamente le parti difettose dovute a materiale, lavorazioni e 

produzione. La garanzia non toglie all'acquirente i diritti legali previsti 

dal codice civile contro le conseguenze dei difetti o vizi causati dalla cosa 

venduta. 

  2) Il personale tecnico interverrà il più presto possibile nei limiti di tempo 

concessi da esigenze organizzative.

  3)  Per richiedere l'assistenza in garanzia è necessario esibire al 

personale autorizzato il sotto riportato certificato di garanzia 

timbrato dal rivenditore, compilato in tutte le sue parti e corredato 

di fattura d'acquisto o scontrino fiscalmente obbligatorio 

comprovante la data d'acquisto. 

  4)  La garanzia decade in caso di: 
    - Assenza palese di manutenzione,
    - Utilizzo non corretto del prodotto o manomissioni,
    - Utilizzo di lubrificanti o combustibili non adatti,
    - Utilizzo di parti di ricambio o accessori non originali,
    - Interventi effettuati da personale non autorizzato.
  5) La Ditta costruttrice esclude dalla garanzia i materiali di consumo e le 

parti soggette ad un normale logorio di funzionamento. 

  6)  La garanzia esclude gli interventi di aggiornamento e miglioramento del 

prodotto.

  7)  La garanzia non copre la messa a punto e gli interventi di manutenzione 

che dovessero occorrere durante il periodo di garanzia.

  8) Eventuali danni causati durante il traspor to devono essere 

immediatamente segnalati al trasportatore pena il decadere della 

garanzia.

  9) Per i motori di altre marche (Briggs & Stratton, Subaru, Honda, 

Lombardini, Kohler, ecc.) montati sulle nostre macchine, vale la garanzia 

concessa dai costruttori del motore.

10) La garanzia non copre eventuali danni, diretti o indiretti, causati a 

persone o cose da guasti della macchina o conseguenti alla forzata 

sospensione prolungata nell'uso della stessa.

This machine has been designed and manufactured using the most modern 
techniques. The manufacturer guarantees its products for 24 months from 
the date of purchase, for private and hobby use. The warranty is limited to 12 
months in case of professional use.

Limited warranty 
  1) The warranty period starts on the date of sale. The manufacturer, 

acting through the sales and technical assistance network, shall replace 
free of charge any parts proven defective in material, machining or 
manufacturing. The warranty does not affect the purchaser's rights as 
established under legislation governing the consequences of defects in 
the machine. 

  2)  Technical personnel will undertake the necessary repairs in the minimum 

time possible, compatible with organisational needs.

  3)  To make any claim under the warranty, this certificate of warranty, 

fully compiled, bearing the dealer's stamp, and accompanied by the 
invoice or receipt showing the date of purchase, must be displayed 
to the personnel authorised to approve work.
 

  4)  The warranty shall be null and void if: 

-  the machine has evidently not been serviced correctly,
-  the machine has been used for improper purposes or has been 

modified in any way,

-  unsuitable lubricants and fuels have been used,
-  non-original spare parts and accessories have been fitted,
-  work has been done on the machine by unauthorised personnel.

  5) The warranty does not cover consumables or parts subject to normal 

wear. 

  6)  The warranty does not cover work to update or improve the machine.
  7) The warranty does not cover any preparation or servicing work required 

during the warranty period.

  8) Damage incurred during transport must be immediately brought to the 

attention of the carrier: failure to do so shall render null and void the 
warranty. 

  9) Engines of other manufacturers (Briggs & Stratton, Subaru, Honda, 

Lombardini, Kohler, etc.) fitted to our machines are covered by the 
warranties of the engine manufacturer.

10) The  warranty  does not cover injury or damage caused directly or 

indirectly to persons or things by defects in the machine or by periods of 
extended disuse of the machine resulting from the said defects.

Cette machine a été conçue et réalisée avec les techniques de production les 

plus modernes. Le fabricant garantit ses produits pendant une période de 

24 mois à compter de la date d’achat, en cas d’usage privé ou d’activités de 

bricolage. En cas d’usage professionnel, la garantie est limitée à 12 mois.

Conditions générales de garantie 

  1) La garantie est reconnue à compter de la date d'achat. Par le biais de 

son réseau de vente et d'assistance technique, le fabricant remplace 

gratuitement les pièces défectueuses dues au matériel, aux usinages et 

à la production. La garantie n'élimine pas, pour l'acquéreur, les droits 

légaux prévus par le Code Civil contre les conséquences des défauts ou 

des anomalies dus à l'objet vendu. 

  2) Le personnel technique interviendra le plus vite possible dans les délais 

liés aux exigences organisationnelles.

  3)  Pour demander l'assistance sous garantie, il est nécessaire 

de présenter au personnel agréé le certificat de garantie 

joint ci-dessous, qui devra être timbré par le revendeur, rempli 

intégralement et accompagné de la facture ou du reçu de caisse qui 

doit obligatoirement être remis pour prouver la date d'achat. 

  4)  La garantie perd toute valeur en cas de : 

    - Manque évident d'entretien.

    - Utilisation incorrecte ou transformations non autorisées du produit.

    - Utilisation de lubrifiants ou de combustibles inappropriés.

    - Utilisation de pièces de rechange ou d'accessoires non d'origine.

    - Interventions effectuées par du personnel non autorisé à ce faire.

  5) Le fabricant exclut de la garantie les pièces consommables et celles qui 

sont soumises à une usure normale due au fonctionnement. 

  6) La garantie exclut les interventions de mise à jour et d'amélioration du 

produit.

  7) La garantie ne couvre pas la mise au point et les interventions 

susceptibles de s'avérer nécessaires au cours de la période de garantie.

  8) Tout dommage éventuellement subi au cours du transport doit être 

signalé sans retard au transporteur sous peine d'annulation de la 

garantie.

  9) Pour les moteurs d'autres marques (Briggs & Stratton, Subaru, Honda, 

Lombardini, Kohler, etc.) montés sur nos machines, la garantie appliquée 

sera celle qui est accordée par le fabricant du moteur en question.

10) La garantie ne couvre pas les éventuels dommages directs ou indirects 

subis par les personnes ou par les biens matériels à la suite de pannes de 

la machine ou dépendant d'une longue suspension forcée de l'emploi de 

cette dernière.

MODELLO - MODELL

DATA - DATE

MODELE

DATE

SERIAL No

SERIAL No

CONCESSIONARIO - DEALER

REVENDEUR

ACQUISTATO DAL SIG. - BOUGHT BY Mr.

ACHETE PAR MONSIEUR

Non spedire! Allegare solo all’eventuale richiesta di garanzia tecnica.
Do not send! Only attach to requests for technical warranties.

Ne pas expédier ! Ne joindre qu'en cas de demande d'assistance technique sous garantie.

Summary of Contents for MT5200





























































Reviews: