E F A P O W E R E V - Q C 2 4 S - I N S T A L L A T I O N A N D U S E R M A N U A L
6 | 28
4
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
This manual contains important instructions that must be followed during installation of the EFAPOWER EV-
QC24S Quick Charging Station.
Grounding instructions
The EFAPOWER EV-QC24S Quick Charging Station must be connected to a grounded, metal, permanent wiring
system; or an equipment-grounding conductor is to be run with circuit conductors and connected to the
equipment grounding terminal or lead on the Electric Vehicle Supply Equipment (EVSE). Connections to the EVSE
shall comply with all local codes and ordinances.
Safety and compliance
This document provides instructions to install the EFAPOWER EV-QC24S Quick Charging Station and should not
be used for any other product. Before installing the EFAPOWER EV-QC24S Quick Charging Station, you should
review this manual carefully and consult with a licensed contractor, licensed electrician and trained installation
expert to ensure compliance with local building practices, climate conditions, safety standards, and state and
local codes. The EFAPOWER EV-QC24S Quick Charging Station should be installed only by a licensed contractor
and a licensed electrician and in accordance with all local and national codes and standards. The EFAPOWER EV-
QC24S Quick Charging Station should be inspected by a qualified installer prior to the initial use. Under no
circumstances will compliance with the information in this manual relieve the user of his/her responsibility to
comply with all applicable codes or safety standards. This document describes the most commonly-used
installation and mounting scenarios. If situations arise in which it is not possible to perform an installation
following the procedures provided in this document, contact EFACEC. EFACEC is not responsible for any damages
that may occur resulting from custom installations that are not described in this document.
No accuracy guarantee
Reasonable effort was made to ensure that the specifications and other information in this manual are accurate
and complete at the time of its publication. However, the specifications and other information in this manual are
subject to change at any time without prior notice.
Warranty information and disclaimer
Your use of, or modification to, the EFAPOWER EV-QC24S Quick Charging Station in a manner in which the
EFAPOWER EV-QC24S Quick Charging Station is not intended to be used or modified will void the limited
warranty. Other than any such limited warranty, the EFACEC
products are provided “AS IS,” and EFACEC and its
distributors expressly disclaim all implied warranties, including any warranty of design, merchantability, fitness
for a particular purposes and non-infringement, to the maximum extent permitted by law.
Limitation of liability
IN NO EVENT SHALL EFACEC OR ITS AUTHORIZED DISTRIBUTORS BE LIABLE FOR ANY INDIRECT, INCIDENTAL,
SPECIAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST PROFITS, LOST
DATA, LOSS OF USE, COST OF COVER, OR LOSS OR DAMAGE TO THE EFAPOWER EV-QC24S STATION, ARISING
OUT OF OR RELATING TO THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF EFACEC OR ITS AUTHORIZED
DISTRIBUTORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.