EFA P5V580 VP3, Manual, Page: 23 / 55

Chapter 1
1 - 3
Wake up on LAN
(require ATX
power supply)
- Supports wake up on LAN function
On-board I/O
-
2 x ISA Slots, 3 x PCI Slots and 1 AGP Slot
-
Use ITE Plug & Play IO chip IT8661
- Supports up to two 3.5” or 5.25” floppy drives
360K/720K/1.2M/1.44M/2.88M format
-
Supports 120MB floppy drive & zip drive
-
All I/O ports can be enabled or disabled in BIOS
-
Two high speed 16550 compatible UARTs
(COM1/COM2/COM3/COM4 selectable) with 16-byte
send/receive FIFOs and support MIDI compliant)
-
One parallel port at I/O address 378H/278H/3BCH with
additional bi-direction I/O capability and multi-mode
selection (SPP/EPP/ECP) (IEEE 1284 compliant)
- Provides protection circuit to prevent damage to the
parallel port when a connected printer is powered up or
operated at a higher voltage
-
Supports PS/2 mouse and PS/2 keyboard (optional)
-
Supports IrDA TX/RX Header
- Supports USB (Universal Serial Bus) in specification
BIOS
-
Licensed advanced AWARD BIOS. Supports Flash
ROM BIOS, Plug and Play ready, DMI ready. Built-in
NCR810 SCSI BIOS
Board size
-
220mm x 235mm