EFA 100260040, Original Operating Instructions

Page: 10 / 24

EFA dehider Original operating instructions
EN
Rev.00
– 10.2020
8 of 24
2.1.4 Prohibition sign
Symbol Meaning
General prohibition sign!
The red signal border/prohibition stripe indicates an immediate danger and is overlaid diagonally over the
self-explanatory symbol. The general prohibition sign must always be used in conjunction with another
sign.
2.2
Personal protective equipment in the following lifecycle phases
Some work requires protective equipment.
This protective equipment must be made available to the operator.
Lifecycle phase Protective equipment
Transport

Protective gloves

Safety shoes
Assembly, start-up &
maintenance

Cut-resistant gloves

Safety shoes

Protective goggles

Hearing protection

Hairnet (for long hair)
Operation

Hairnet (for long hair)

Cut-resistant gloves

Safety shoes

Protective goggles

Hearing protection

Protective clothing
Storage

Protective gloves

Safety shoes
Disposal

Protective gloves

Safety shoes
2.3
Conduct at the workplace
The workplaces must be designed in such a way that each employee has at least 1.5 m² of freedom of
movement. Ensure proper lighting of the workplace (at least 500 lux).
No other workplace should protrude into this area, otherwise there is an injury hazard due to the actions
carried out with the dehider.
The floor must minimise the danger of slipping on wet, greasy or dirty surfaces.
The workplace must comply with local hygiene and workplace regulations.

Keep your workplace tidy and in good working condition. A cluttered or messy workplace can lead to
accidents.

Take environmental influences into account.

Keep other persons away from your workplace. Focus on the job in hand when working.

Do not use the EFA pneumatically operated dehider when you are tired and/or unfocused.

Store the dehider in a safe manner. Store unused devices in a dry place.

Avoid wearing loosely fitting items of clothing and jewellery that can be caught by moving parts. Wear
sturdy shoes during your work. Always wear a hairnet!

Ensure that your workplace has a correct, ergonomic set-up and make sure that you are standing
securely.

Do not leave any tool keys connected. Check that all keys have been removed before switching on.

Look after your tools with care. Use only sharp and undamaged blades so that you can work better and
more safely.

Only use genuine EFA accessories/spare parts.

Changes and modifications to the machine are not permitted and, if any such changes are made, S&W 's
guarantee and liability shall be invalidated.
The use of other equipment, accessories or spare parts can endanger you and other persons.
Non-compliance will void the warranty.