Electrical Connection
Before
completing
any
connection,
make
sure
the
house
voltage
corresponds
to
the
voltage
indicated
on
the
label
affixed
inside
the
appliance
.
It
is
advisable
to
call
a
qualified
technician
to
make
the
electrical
connection
.
Appliance fitted with plug
Connect it to a socket which conforms to current regulations. If you intend to connect it directly
to the electric mains, remove the plug and fit an approved bipolar switch with a minimum
contact opening of not less than 3mm.
If the plug is not accessible once it has been inserted in the socket, it will however be
necessary to fit an approved bipolar switch with a minimum contact opening of no less than
3mm.
Appliance
without
plug
Fit
an
approved
plug
or
an
bi-polar
switch
with
a
minimum
contact
opening
of
no
less
than
3mm.
T
he
company
is
not
liable
for
any
problems
caused
by
the
user’s
failure
to
comply
with
the
above
instructions
.
1
0
Cleaning & Maintenance
Regular maintenance and cleaning ensures good performance and reliability, while
extending the working-life of the appliance.
SURFACE :
Wash with warm soapy water and a soft sponge. Never use abrasive detergent, scouring
pads, steel wool or solvents on any part of this appliance as this will cause irreparable
damage.
Note:Never use metallic scouring pads or abrasive products that could damage the surface.
ALUMINIUM GREASE FILTERS
: Wash in the dishwashers or soak the panels in a
degreasing agent for an hour, then rinse off. The filter must be cleaned at least
once a month or depending on the frequency of appliance usage.
CHARCOAL FILTERS:
(only in re-circulating model): Charcoal filter cannot be
reused. They must be replaced
once
every
6 month
s
or depending on the frequency
of appliance usage
s to ensure good perf
o
rmance
.
LED LIGHT
REPLACEMENT:
Before attempting to replace the
LED
light, make sure
that the light switch is turned off. Remove the grease filter to access the
LED
light
.
