12
Using the turnspit
In the “CONVECTIONAL OVEN” models, the turnspit can be used in combination with the grill. After fitting the
food on to the spit S, block it with the two forks F. then proceed as follows:
-
Fit the knobs protection as shown in (fig. 6)
-
Position the spit support as shown in (fig.7)
-
Fit the end of the spit into the motor M at the back of the oven (fig. 7).
-
Fit the support into the circular groove in the spit.
-
Unscrew and remove handle A.
-
Place the oven tray with a little water on the lowest shelf of the oven.
-
Turn the knob to position
to start up the motor.
-
Partially close the oven door (fig. 6b).
-
When the cooking time is up, screw the handle on the spit and remove everything from the oven. If necessary,
use an oven glove to avoid any burn.
Fig.6
Fig.7