PROFIVE® NUCE_C 54 W
Hardware Reference Manual – P – Revision 1
E.E.P.D. GmbH | Gewerbering 3 | 85258 Weichs
Copyright ©2020|2021 E.E.P.D. GmbH.
All rights reserved.
79
10/2021 Revision 1.7
EFI Device First
<Disabled>
<Enabled>*
Determine EFI device first or legacy device first. If
enable, it is EFI device first. If disable, it is Legacy
device first.
UEFI OS Fast Boot
<Enabled>*
<Disabled>
If enabled the system firmware does not initialize
keyboard and check for firmware menu key.
USB Hot Key Support
<Disabled>*
<Enabled>
Enable/Disable to support USB hot key while
booting. This will decrease the time needed to boot
the system.
Timeout
Adjust value [0-10]
Default value [5]
The number of seconds that the firmware will wait
before booting the original default boot selection.
Automatic Failover
<Disabled>
<Enabled>*
Enable: if boot to default device fail, it will directly
try to boot next device.
Disable: if boot to default device fail, it will pop
warning message then go into firmware UI.
EFI
No options
EFI Boot Order Settings
Tab. 31: Boot Menu
