GENERAL SAFETY
The “Eemax ProAdvantage” heater is specifically designed to take in hot or cold water and
heat it to temperatures suitable for normal domestic usage up to a maximum of 140 F(60 C).
To obtain optimum performance and energy savings, the unit should be located as
near as possible to the point of use. “Thermostatic” models indicated by the letters T2T after
the model number, these models and only these, can be fed with pre-heated water and be
used to boost temperature
Also, ensure that the pipes are clear of installation debris before fitting the heater.
THIS HEATER MUST HAVE
DEDICATED INDEPENDENT 208V 3 PHASE,
240V 3 PHASE , 480/277V 3 PHASE
CIRCUITS, USING CORRECTLY
RATED WIRES AND CIRCUIT BREAKERS. PER UL 499, 18.4 THE RATING
OF THE BRANCH-CIRCUIT OVERCURRENT PROTECTIVE DEVICE
SHALL BE 150% OF THE RATING OF THE PRODUCT.
DO NOT USE SPACE SAVING BREAKERS
.
WARNING
IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE OR MAINTENANCE
CAN CAUSE
DEATH, SERIOUS BODILY INJURY OR PROPERTY DAMAGE
. REFER TO
THIS MANUAL FOR ASSISTANCE OR CONSULT THE LOCAL ELECTRIC UTILITY FOR
FURTHER INFORMATION.
FAILURE TO
GROUND
THE SYSTEM MAY RESULT IN DEATH OR SERIOUS INJURY.
WARNING
WARNING
HAZARD OF ELECTRICAL SHOCK! BEFORE REMOVING THE COVER OR SERVICING THE
WATER HEATER, MAKE SURE THE ELECTRICAL SUPPLY TO THE WATER HEATER IS
TURNED “OFF”. FAILURE TO DO THIS COULD RESULT IN
DEATH, SERIOUS BODILY INJURY,
OR PROPERTY DAMAGE
.
NOTE: UNIT HAS MULTIPLE ELECTRICAL CONNECTIONS.
ENSURE TO DISCONNECT ALL POWER SUPPLIES BEFORE SERVICING
When removing and re-installing the cover make sure to use the ground screw provided. There are a total of 5
screws that affix the cover to the unit. If you are missing any call technical support at 1-800-543-6163.
Summary of Contents for PA018208T2T
Page 4: ......
