Eelectron Horizone Mini IN00M02WEB, Installation Manual

Page: 50 / 118

EELECTRON SPA IN00M02WEBFI00020100_ADMIN_MANUAL 50 / 118
4 → Off / Protection
Note: This sub-object is the one associated
with scenarios and schedules by default
Setpoint - current Floating point (2 bytes DPT
9) Setpoint used by the thermostat based on the
current mode. Read-only.
Setpoint base Floating point (2 bytes DPT
9) If the thermostat can be adjusted with a single
setpoint, or if the current setpoint is also
writable (for example, to temporarily bypass
the current mode setpoint), associate a KNX
address (which can be the same as the
current one) in order to adjust it from the
graphics
Offset Floating point (2 bytes DPT
9) If the thermostat re/- 3 ° adjustment
with respect to the base setpoint, associate a
KNX address to adjust it in the graphics,
instead of the setpoint
Setpoint XXX
heating /
cooling Floating point (2 bytes DPT
9) Setpoints associated with the different modes
for winter (heating) and summer (air
conditioning) seasons
Heating/cooling ON/OFF (1 bit DPT 1) Convention:
0 → air conditioning (summer)
1 → heating (winter)
Note: if address is absent, the thermostat will
be in heating only mode
Heating
Cooling
(ON/OFF) ON/OFF (1 bit DPT 1) Heating or air conditioning request status;
read-only.
If the thermostat controls a single output in
both seasons, enter the same KNX address
in both lines
Automatic / manual
mode ON/OFF (1 bit DPT 1) Convention:
0 → manual
1 → auto
Ventilation speed Percentage (1 byte DPT 5) Typical convention:
0% → fans stopped
33% → speed 1
66% → speed 2
100% → speed 3
Ventilation speed 1
Ventilation speed 2 ON/OFF (1 bit DPT 1) Control of fans in the form of individual
mutually exclusive objects.