EE Navwatch EE904DVS, User Manual

Page: 5 / 98

Networking Support
You can remotely connect to the server through multiple network configurations, including LAN/WAN/ISDN or
PSTN. You can also manually configure the ports of each DVR, which allows you to utilize a single high-
speed connection to address multiple DVRs from a remote site. Then navigate and operate all the system
functions as if you were at the main system-the interface is the same remotely as it is at the server.
Pan/Tilt/Zoom
Control multiple PTZ camera formats, locally and from a remote location.
Watchdog
In the unlikely event system freezes, the system’s watchdog feature will automatically reboot the system.
Audio
Monitor live audio, record, playback and backup audio on one or multiple cameras.
Multi-Board
If you want to have a 8 cameras inputs DVR system from 4 cameras input system (like DIT-4 & DIT-4 PRO),
you can get a 8ch DVR system after installation of one more DIT-4 or DIT-4 PRO capture card in the existing
4ch DVR system
.
DVR Server - RMS
You can use both RMS and DVR Server on the same PC at once.
1.3. Warning
CE (Communaut’ European
)
This is a class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
FCC (Federal Communications Commission)
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Users Guide Page 5 of 98 Perpetual Digital