2
Magnet base
Coolant tank
Motor switch
Magnet switch
Coolant feed tap
Reversing switch
Crank handle
Arbor
Arbor support bracket
Annular cutter
(Not included)
Gear selector
Ejector port
Pilot pin
(Not included)
MT3 Twist drill bit
(Not included)
MT3 Chuck adaptor
and Chuck
(Not included)
STANDARD ACCESSORIES
WRENCH M8
HEX. KEY M2.5
HEX. KEY M4
CHIP GUARD KIT
COOLANT TANK KIT
SAFETY CHAIN
DRIFFT
OPTIONAL ACCESSORY
MT3 CHUCK ADAPTOR
16MM CHUCK & KEY
MT3 TAPPING ADAPTOR
TAPPING ATTACHMENT
MT3 Tapping adaptor
and Tapping unit
(Not included)
POWER INPUT
1800 W
SPEED 1
150 / 90 MIN
SPEED 2
200 / 120 MIN
SPEED 3
300 / 180 MIN
SPEED 4
380 / 230 MIN
DIAMETER BY DEPTH OF CUT ( HAND FEED)
75MM X 50MM
DIA. X DEPTH OF MT3 TWIST DRILL BIT 32MM X 150 M
DIA. X DEPTH OF MT3 CHUCK ADAPTOR WITH TWIST DRILL BIT 16MM X 110MM
DIA. X DEPTH OF TAPS 25.4MM X 40MM
MAGNETIC ADHESION 32,000N
N. / WEIGHT 24.8 kg ( 54.56 lbs)
NO/FULL LOAD RPM
CAPACITY:
EM16 4 Speed Drilling System
