Chapter 3: FireWorks node connections
P/N 3102213-
EN • REV 006 • ISS 18FEB19
37
Using an FW-SP4I card serial port
Figure 37 s
hows you how to connect a Bosch/Radionics D6600 to the
FW-UL6W using an FW-
SP4I card serial
port. For more information, see
FW-SP4I Serial Port Expander Card Installation Sheet
(P/N 3100897
-EN
).
Figure 37: D6600 serial connection
(1)
FW-UL6W, FW-
SP4I card, and FW
-UL6CC1.
(2)
RJ
-
45 to DB
-
9 adapter cable.
(3)
DB
-
9 serial cable . See
Figure
38
.
(4)
Bosch/Radionics D6600.
Wire a DB
-
9 ser
ial cable as shown in Figure
38. Connect one end to the RJ
-
45 to DB
-
9 adapter cable and the
other end to COM 3 on the D6600.
Figure 38: DB-9 serial cable wiring diagram
Using an MN-COM1S
Figure
39
shows you how to connect a Bosch/Radionics D6600 to the
FW-UL6W using an MN-
COM1S.
For more
information, see
MN-COM1S RS-232 to Ethernet Interface Installation Sheet
(P/N
3101601-EN
).
Figure 39: D6600 MN-COM1S connection
(1)
FW-UL6W and FW-UL6CC1.
(2)
RJ
-
45 Ethernet patch cable, Cat 5e or better.
(3)
DB
-
25 serial cable assembly
(4)
Bosch/Radionics D6600 (COM3)
Wire a DB
-
9 connector to the DB
-
25 serial cable supplied with the MN
-
COM1S as shown in
Figure 40.
(2)
(4)
(1)
(3)
(2)
(4)
(1)
MN-COM1S
(3)
Summary of Contents for FireWorks FW-UL6S
