Edwards EXC 100E, Instruction Manual

Page: 37 / 42

© Edwards Limited 2015. All rights reserved. Page 31
Edwards and the Edwards logo are trademarks of Edwards Limited.
Service and accessories
D396-20-880 Issue H
7.3.5 ACX air-cooler
An ACX air-cooler can be fitted to the EXT pump and can be operated automatically from the Controller. However,
please refer to Section 3 of the instruction manual for the EXT pump to check the suitability of air cooling in a
particular application.
7.3.6 Active vacuum gauges
Examples of suitable gauges and accessories which you can connect to the EXC Controllers are listed below. Note that
you can only connect an AIM gauge directly to the active gauge connector on the Controller; you must connect other
gauges through the logic interface: refer to
Section 3.9 .
Air-cooler Item Number
ACX70 B580-53-050
ACX250 B580-53-150
ACX350/500 B580-53-200
Description Item Number
AIM-S-NW25 Active Inverted Magnetron Gauge D145-45-000
AIM-SL-NW25 Active Inverted Magnetron Gauge D145-48-000
APG-M-NW16 Active Pirani Gauge D021-71-000
APG-L-NW16 Active Pirani Gauge D021-73-000
ATC-E Active Thermocouple Gauge D351-08-000
ATC-D
1
/
8
inch NPT Thermocouple Gauge Tube D351-12-000
ATC-M
1
/
8
inch NPT Thermocouple Gauge Tube D351-13-000
Active Gauge Cable, 0.5 m long D400-01-005
Active Gauge Cable, 1 m long D400-01-010
Active Gauge Cable, 3 m long D400-01-030