Edwards Barocel 7025, Instruction Manual

Page: 26 / 32

Page 24
W602100880_A - Uninstallation
Uninstallation
To uninstall the gauge:
1. Vent the vacuum system.
2. Remove the gauge from operation.
3. Unfasten the lock screws and disconnect the sensor cable.
4. Remove the gauge from the vacuum system and install the protective lid.
WARNING: CONTAMINATED PARTS
Risk to health and environment from contaminated parts. Before you start work, find out
if any parts are contaminated. Obey the relevant regulations and follow the necessary
precautions when handling contaminated parts.
CAUTION: IMPACT DAMAGE
Risk of damage to equipment. The ceramic sensor can be damaged by impacts. Do not
drop the gauge.
CAUTION: DIRT CONTAMINATION
Risk of damage to equipment. Dirt and damage will cause the gauge to operate
incorrectly. When you handle the gauge, prevent dirt and damage to the vacuum
components.
CAUTION: DIRT SENSITIVE AREA
Dirt sensitive area. Do not touch the components with bare hands as it increases the
desorption rate. Wear clean, lint-free gloves and use clean tools when working in this
area.