Edwards AIM-SI1-NW25, Instruction Manual, Page: 8 / 26

D146-71-880 Issue E
Page 4 © Edwards Limited 2015. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Technical data
2.4 Error monitoring
The set-point output is switched off:

for 0.5 seconds during gauge switch on

when pressure output signal voltage < 1.8 V
2.5 Materials exposed to vacuum

Stainless steel (AISI 304, 416 and 347)

Fluoroelastomer

Soda lime glass
Figure 2 - Dimensions (mm)
Back EMF suppression diode
*
Min. surge rating 1 A
Min. reverse voltage rating 100 V
Gauge identification resistance 100 k
 
2% AIM-SI1/AIM-SLI1
110 k
 
2% AIM-XI1/AIM-XLI1
*
Required when you use an external d.c. relay connected to the set-point output.
1. Clearance required for electrical cable