4
1 . 8 0 0 . E D V O T E K
|
|
w w w . e d v o t e k . c o m
|
|
i n f o @ e d v o t e k . c o m
OPERATION MANUAL
TruBlu™ 2 LED Transilluminator
Instructions
If you are visualizing fluorescently stained DNA gels/fluorescent colonies.
1. Place unit on a flat surface. For optimum viewing do not use the TruBlu2 near a window or in a place of high
ambient light.
2. Plug the unit into a grounded outlet using the appropriate plug (110 or 220V).
3. Open the orange lid.
4. Place the objects (gels, petri plates, etc.) onto the blue plate of the light
box.
5. Close the orange lid.
6. Turn on the blue light by adjusting the switch to the top setting (black
circle).
7. Visualize your results and/or take a picture with your phone, tablet, or
camera.
8. Turn off the blue light by adjusting the switch to the middle setting
(empty circle).
9. Lift the orange lid and remove the objects.
10. Clean the blue plate using a soft tissue or towel and distilled water.
If you are visualizing non-fluorescently stained DNA gels or other objects.
1. Place unit on a flat surface. For optimum viewing do not use the TruBlu2 near a window or in a place of high
ambient light.
2. Plug the unit into a grounded outlet using the appropriate plug (110 or 220V).
3. Open the orange lid and the blue plate.
4. Place the objects (gels, petri plates, etc.) onto the white plate of the light
box.
5. Turn on the white light by adjusting the switch to the bottom setting
(white circle).
6. Visualize your results and/or take a picture with your phone, tablet, or
camera.
7. Turn off the white light by adjusting the switch to the middle setting
(empty circle).
8. Clean the white plate using distilled water.
Specifications
•
Blue Light Wavelength: 470 nm
•
LED Life: 50 000 hours
•
Power: 110 or 220 outlet
•
Max Gel Size: 17 cm x 27.5 cm x 1.5 cm
