LTG 2100 Manual for RCG guys by E-Copter
☺
This manual is written by E-Copter by courtesy for Logictech and Logictech users. For any information or comment
on the present manual or if you need any support, you can contact us at
www.e-copter.com
so we can update the
manual if necessary. E-Copter allows usage of this manual with no restriction (copying, editing…). A fully editable
version is available on simple request by email at
.
E-Copter is the France and Monaco exclusive distributor of the LOGICTECH brand and products manufactured by
LOGICTECH, and thereby assures the After Sales Service and the User Support for materials purchased from
authorized dealers for these both countries.
Product Specifications:
High performance Heading Hold gyro, specially designed for electric powered helicopters .
- Immediate Initialization (Tail Lock mode).
- Removal of drift effects in the event of fast temperature changes during operation by internal software.
- Fully compatible with all types of transmitters and receivers.
- Support digital & analogics servos (Servo Speed function).
- Compatible with Logictech matched digital servos (LTS-6100G, LTS-3100G).
- Independent left and right mechanical servo limits.
- Self diagnosis function.
- Easy programming with one button (“Menu” button and transmitter rudder stick).
Technical Specifications:
- Voltage: 4.5 volts to 5.5 volts (nominal: 5 volts)
- Current draw: 20 Mah
- inputs: 2 (Anticouple, gain)
- Outputs: 1 (anti-servo)
- Gain Control: Remote (on a spare channel allocated for gyro gain)
- Programming: “Menu” button and rudder stick.
- Leds for programming values display / gain display: 8
- Dimensions: 22mmx22mmx11mm-Weight: 10 Grams
Safety tips / recommendations
- Be sure to properly install and connect the wires/plugs. Do not to introduce any foreign substances in the product
(corrosive, conductive, flammable and any other type of Solid, liquid or chemical substances)
-Do not use the product under extreme conditions (conditions recommended: -5 ° to +35 °)
-Do not submit the product to sudden changes in temperature
-Be sure to install the product on a clean and degreased area to allow a suitable adhesive power to the adhesive pad.
- Be sure to install the product in a abnormal vibration free area / support.
-The product should not be dismantled / reassembled by anyone except by authorised people (Logictech
maintenance or authorised service)
-Stop using the product if you have a malfunction or failure of the product and consult immediately the after sale
service
Installing the gyroscope
- The gyroscope must be laid horizontally per respect to the axis of main rotor of the helicopter. Typically, the
gyroscope will be laid flat, with the LED and a button up on a standard helicopter. For other flying objects (UFO,,
aircraft, boats, motorcycles…),please note that the gyroscope compensates and corrects the cap through a virtual axis
crossing from top to bottom (face with leds / buttons being the top).
-
Be sure to install the gyroscope at a distance of at least 10 cm from the engine and as far as possible from the belt.
The functioning of the gyroscope could be disturbed by electromagnetic noises generated by these components.
