6
network line, power line and other conducts which are connected with outside. In case of thunder, please don’t
insert and pull these lines & cables.
[Note]
Carefully examine the AC power line attached when purchasing the
Window Table
. In case of any problems,
please contact relevant dealer.
The power line used for micro
Window Table
must conform to the following safety regulations:
Conformity to CCC certification
The power plug should be inserted in the safety of the final good power supply
The power plug must conform to GB15934-2008
5.5 Instructions on safety
1)
The power plug hole should be installed near the equipment or places easy for operation. When inserting and
pulling the power line, avoid directly pulling out the power line by pulling and dragging. Please be sure to pull
from the root of plug so as to guarantee the safety and caution against electric shock. Please don’t disassemble
the power adaptor.
2)
Not to place the product in places with easy access to water.
3)
In case of installation, please place the product on a stable supporting foundation. This product may fall off due
to un-stable placement, which leads to serious damages.
4)
Not to place the products in places where there are frequent flow of people so as to avoid trampling the electric
wire. Please make sure that no articles are placed on the electric wire.
5)
Follow all the warning information and indication on the products.
6)
If you don’t plan to use the product for a long period, please pull off the power plug so as to avoid excessive
transient voltage, which can cause damages.
7)
Please don’t splash any liquid on the product. This action may lead to risks of fire accidents or electric shock.
8)
In case of the following conditions, it should be serviced by professionals:
The power line or socket has been destroyed or torn off.
The liquid is splashed to the product.
The product is drenched by raining or splashed by water.
When you follow the instructions on operation, the product is still unable to run normally.
If the product once fell off or its shell has been destroyed.
If the product has apparent damages.
9)
For the usage and storage temperature of this product, please refer to the product specification in annex A. If
the product is not used and stored within the defined temperature scope, it may lead to permanent damages on
the product.
10)
Please don’t use the power adaptor where it’s near to water or other liquids. Please don’t splash liquid to the
power adaptor.
Note:
All the photos & diagrams in this manual are schematic diagrams and can only be used for reference. The actual
use should be based on the object.
