hurricane SB120
2010
14/23
7.10 Assembly / changing the saw blade
7.10.1 Recommendations for saw blade use
Reinforced
concrete with soft
aggregates
Reinforced
concrete with hard
aggregates
Abrasive
materials, e.g.
sand-lime brick,
masonry
Reinforced
concrete with
soft aggregates
WS 15C5
Υ
Υ
WS 20C5
Υ
Υ
WS 40
Υ
Υ
EURIX 30
Υ
Υ
Υ
Υ
EURIX 40
Υ
Υ
Υ
WS 20C3
Υ
7.10.2 Normal cutting
Attach the saw blade to the blade flange using the mounting flange and the bolt M 12x1,5 x 45
(fine thread).
Use only saw blades whose hole diameter matches the flange (H60).
The machine is only suitable for sawing with blade diameters up to Ø 1000 mm / Ø 39.3“.
For perfect centering of the saw blade, the saw blade hole must match the centering collar of the
blade flange. Do not use saw blades with worn holes. Damaged flanges must be replaced.
Use saw blades approved for a cutting speed of at least 43 m/sec.
Use only saw blades whose intended use is known:
-
concrete, masonry, reinforced concrete, natural stone
-
dimension
-
approved cutting speed