TIP CARE
1. Set desired temperature. Blinking Lamp means Tool is regulating.
2. TIN the Tip. (apply solder)
3. Do not rub, bend or reshape the Tip.
4. Always clean the Tip by wiping it against the saturated sponge and always RE-TIN.
LTC71
RCS73
Loosen RCS73 Collar by turning counter-clockwise
and pull the Tip straight out.
CAUTION
•Tool must be cool when changing tips.
•Do not twist or wiggle the tip.
REPLACING TIPS
AFTER TIP IS INSTALLED, TIGHTEN
COLLAR PROPERLY.
Adjust the
length of the
fume pipe
according to
tip length
RCS73 Retaining Collar Sleeve
OPTIONS
The 971DF can be converted to a Hot
Air soldering system. Ask for PR570 Air
Flow Regulator, RCS75 Retaining Collar
Sleeve, LTA75H Insert Accumulator and
LT428 Hot Air Tip.
WARNING: DO NOT HIT OR TAP THE TOOL. HEATER ELEMENT WILL BREAK!!!
Part No. & Description
a
b
LT374 Standard Probe .03 (0.8 mm) .48 (12.2 mm)
LT375 Standard Spade .06 (1.5 mm) .48 (12.2 mm)
LT376-7 SMD Channel .12 (3.0 mm) .48 (12.2 mn)
LT392 Extra-Long Needle .02 (0.5 mm) 1.13 (28.8 mm)
LT394 Extra-Long Spade .07 (2.0 mm) .93 (23.6 mm)
LT399 Large Face .17 (4.3 mm) .49 (12.4 mm)
LT444 SMD Mid-Length Fine Spade .04 (1.0 mm) .78 (19.8 mm)
LT446 SMD Probe .03 (0.8 mm) .48 (12.2 mm)
LT382 Long Cone .02 (0.5 mm) .62 (15.6 mm)
LT395 Mid-Length Stubby Spade .09 (2.3 mm) .74 (18.8 mm)
LT431 Mid-Length Spade .07 (1.8 mm) .74 (18.8 mm)
LT439 SMD Thin Probe .03 (0.8 mm) .50 (12.7 mm)
LT439-1 Same as LT439, Angled
LT445 SMD Angle Face .03 (0.8 mm) .48 (12.2 mm)
General Purpose Soldering Tips
Iron Plated for long life•Nickel and Chrome Plated for optimum heat transfer.
EDSYN has over a 100 varieties of standard and custom-made Tips.
CONTACT EDSYN FOR MORE SELECTIONS.
