-
3
-
Setup:
1. Place the CD/DVD & Credit card shredding plastic bin provided with your shredder,
inside the appropriate rib position attached to the inside of waste bin.
2. Place the shredder securely on top of the waste basket. Be sure not to allow your
fingers to get between the basket and the shredder as you are placing the shredder
in place.
3. Plug the power cord into any standard 220-240 volt AC outlet.
Operating the shredder:
The Main Switch is located on the top of the shredder. The Main Switch has three (3)
settings.
1. When
AUTO
is selected, the shredding process is started automatically by
inserting the paper, a disk or a credit card into the feed opening. When inserting
papers, please do not shred CD/DVD and credit card at the same time. When
inserting CD/DVD and credit card, also please do not shred paper at that time. The
shredder will stop automatically when the paper, a disk or a credit card has
completed its travel through the feed opening.
2.
REV
is used to assist in the removal of a paper jam, which reverses the shredder
process prior to a completed cycle, thus clearing the cutters.
3.
OFF
is used to terminated the power to the shredder. The mode is recommended
when emptying the wastebasket or when the shredder is not in use for a prolonged
period of time.
Shredder capacity:
Cross-Cut shredder X7CD will shred ten (7) sheets of A4 size 80g/m
2
paper, a CD/DVD
disk or credit card at once and will accept paper widths up to 220mm. When shredding
small material like envelopes or receipts, insert them through the middle of the feed
opening.
