Operation:
1. Insert the power plug into an electrical socket
2. Push the switch (4). A red indicator (3) will light up and
the motor will start up
3. Wait 4-8 minutes for the machine to warm up. Once it has reached
the proper temperature, a green indicator (2) will light up
4. Put the item being laminated into a laminating film leaving a
3-5mm border from the sealed end of the pouch
5. Insert them together into the entrance (1) of the laminator closed side first.
They will be laminated automatically
Please note:
1. In order to avoid crumpling of the pouch, please
do not
insert the open
side of the pouch into the entrance first. Also, do not use scissors to open
the pouch as this could damage the pouch so that it will not be laminated
properly. Please ensure you observe the markings in front of the entrance
when inserting the pouches and ensure that the pouch is aligned with the
entrance markings and inserted vertically to the entrance.
2. Certain types of paper may not seal evenly or may appear cloudy after
lamination. If this happens, re-insert the pouch into the laminator for a
better effect.
3. When you are not laminating, it is recommended that you turn the unit off.
4. When the pouch slides out of the exit after being laminated, it may be very
hot and will lose shape easily. Please be careful not to injure your hands.
Do not damage the pouch by over excessive handling or pulling.
5. To use cold laminating function after hot laminating, please wait at least
30 minutes so that the machine can cool down.
