background image

GENERAL INFORMATION

- Before operating this appliance, read the following instructions. Keep the manual in a safe 
place so you can consult it at any time.
- After removing the packaging, check that the appliance is in good condition, and if you have 
any questions, do not turn it on.
- Contact your distributor or seller for the return of the appliance.
- This device is packed for protection against any damage or damage that may be caused by 
transportation.
- The packaging is made up of plastics and other materials that can be dangerous. Keep out 
of reach of children. These materials are recyclable and must be delivered in a unit of the 
appropriate recycling, respecting the environmental laws.

- This appliance has been designed for DOMESTIC USE only and must not be used with any 
other appliance, such as for example in a commercial, industrial or any other non-residential 
installation.
- Do not handle the appliance with wet hands and do not immerse it in water or any other 
liquid.
- Unplug the appliance from the mains before cleaning it.
- This device is not intended to be used by people (including children) with reduced physical 
capacities, sensory or mental, or lack of experience and knowledge, unless they have received 
instructions regarding use of the device or are accompanied by a responsible person 

- Keep the device out of the reach of children under 8 years.
- Children should be supervised during use, to make sure they do not play with the applian-
ce.
- Do not continue using the appliance if you notice that it is not working properly. Turn it off 
immediately and look for the manufacturer or an authorized technical service so that a 

qualified technician can evaluate the damage and repair it if necessary.
- If the power cord is damaged, it must be replaced by the manufacturer or by a qualified 

technician to avoid the risk of electric shock.
- Turn off the appliance and disconnect the power cord from the power outlet before 
replacing any part or accessory, or before touching the moving parts of the device.

IMPORTANT SAFETY INSTRUCTIONS

- Connect the device only to an AC power source. The voltage indicated on the rating plate 
that is on the device, must match the voltage of the power supply.
- Always disconnect the appliance from the socket after use, to disassemble or clean it.
- Always mount and use the appliance on a stable and secure surface.
- Never place the appliance on or near heat sources, such as a gas / electric stove or inside a 
hot oven. Keep the power cord away from these sources of heat or sharp objects.
- Never handle the power cord with wet hands.

- The use of accessories or parts not recommended by the manufacturer may cause a fire, an 

electric shock or serious injuries.
- This device is manufactured to be used indoors. Never use it outdoors or in outside parts of 
the house.

REF. 

33918

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS

Summary of Contents for 33918






















Reviews: