REF.
07592
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
CHARGING
- The switch must be turned off when charging.
- Shaver should be charged under the circumstance of temperature
between 5°C-35°C.
Please don’t charge it in the sun or beside a warmer ( fig.2)
- The applicable voltage is 220V~50Hz
- To guarantee a long life for appliance,please take off it from the wall
socket when the battery has been fully char- ged,and charge it when it
is empty.Do not connect it with power continuously after nishing the
charging.
- Insert the end of power line into the socket of shaver,and then put the
plug into power socket,the indication lamp will be light at the same
time( g.3,4).
- The shaver should be charged for 8 hours normally.Nor- mal shaving
time is 45 minutes after fully charged.
- Please do not charge the shaver in a closed pouch.
- Please take good care of the power line for spare use after charging.
- Once the power line is damaged,it must be replaced from the manu-
facturer or after service center.
SHAVING
- Press the switch lock key so the shaver can be used ( fig.5)
- Rapidly move the shaver back and forth against the growing direction
of beard ( fig.6)
- The shaving is best when the face is dry,so please shave before or
some time after washing the face.It will take some time for your skin to
get used to the RUITUO shaving device.
- Hair on the neck can also be shaved in this way.
- Turn off the shaver,put on the dustproof cover to avoid damage ( fig.7).
- Don’t use it in case that shaving heads is damaged,as it may hurt your
skin.
TRIMMER
- Use to trim beard on the temple and other long beard.
- Slide the trimmer upwards to push it out ( fig.8)
- Turn on the shaver to trim the beard ( fig.9)
- Lubricate the trimmer teeth every two months with a drop of sewing
machine oil (fig.10)
CLEANING
- Turn off the shaver when start cleaning.
- Regular cleaning guarantee shaving performance.
- Cleaning for the shaving unit:
1- Clean the shaving unit every week
2- Clean the top of the appliance with the supplied brush.
3- Press the release button and take off the unit( fig.11).
4- Brush the hair chamber( fig.12)
5- Put the shaving unit back onto the shaver.
- Cleaning for the shaving heads
1- Clean the shaving heads every two months.
2- Press the release button and remove the shaving unit(fig.11).
3- Anticlockwise take out the frame( fig.13)
4- Slide the shaving heads out of the retaining frame one by one.(Note:-
do not exchange the group of cutters and guards,or else it will effect the
shaving performance ( fig.14)
5- Clean the cutters with brush ( fig.15)
6- Clean the guards with brush ( fig.16)
7- You can also clean the shaving heads with a degreasing liquid(e.g.Al-
cohol)when needed.If you do, lubricate the shaving heads with a drop of
sewing machine oil after cle- aning.This prevent wear of the shaving
heads( fig.17)
8- Slide the shaving heads back into the retaining frame and put the
retaining frame back into the shaving unit.
SHAVING HEADS REPLACEMENT
- Replace the shaving heads every two years for optimal shaving perfor-
mance.
- Use shaving heads to replace damaged or old one.That makes you get
the better shaving performance.
BATTERY DISPOSE
- The battery used in this shaver contains material that will pollute the
environment.If you need to dispose the sha- ver,please dismantle the
batteries and turn them to the fomal collection places.
- You yourself also can dismantle the battery in the shaver( fig.18)
- Before dismantle the battery,the shaver must be cut from the power
and without any remaining electricity in it. If there is remaining electrici-
ty,turn on the shaver until motor stops.
- Dismantle the battery (fig.19).
- After dismantling the battery,do not connect the shaver to the AC
outlet.
