EditShare 24Q, Setup And User Manual

Page: 109 / 112

TP-00347-01
109
FCC (United States)
FCC (United States)
The computer equipment described in this manual generates and uses radio frequency (RF)
energy. If the equipment is not installed and operated in strict accordance with the manufacturer's
instructions, interference to radio and television reception might result.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Part 15, Class A, of the FCC Rules, is designed to provide reasonable protection against radio and
television interference in a residential installation. Although the equipment has been tested and
found to comply with the allowed RF emission limits, as specified in the above-cited Rules, there is
no guarantee that interference will not occur in a particular installation. Interference can be
determined by turning the equipment off and on while monitoring radio or television reception.
The user may be able to eliminate any interference by implementing one or more of the following
measures:
• Reorient the affected device and/or its receiving antenna.
• Increase the distance between the affected device and the computer equipment.
• Plug the computer and its peripherals into a different branch circuit from that used by the
affected device.
• If necessary, consult an experienced radio/television technician for additional suggestions.
Canadian Verification
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations (ICES-003, Class A).