9
Installation
Plan your layout: The ‘closing’ end of the rail assembly should
be set back from the closed door by 1/2” minimum. The door
may be mounted on the exterior or the interior.
Attach rail assembly to wall or ceiling with 5/16” lag screws.
Note: Attachment must be to adequate framing or strapping.
Drywall attachment only is not permitted. The track must not
come into contact with the door’s supporting sliding track at
any time. Curved brace may be rotated for maximum
flexibility. Ceiling mounted clearance shown is from ceiling
plane to centerline of U-fitting. Wall mounted clearance is
from bottom of track to U-fitting.
1/2” MIN
4” to 7”
4” to 7”
