LIMITED WARRANTY ........................................................................................................................ 2
IMPORTANT SAFETY INSTRUCTIONS............................................................................................ 3
UNPACKING ........................................................................................................................................ 4
PARTS .................................................................................................................................................... 5
CONNECTING A MICROPHONE OR OTHER DEVICE ................................................................ 6
CONNECTION USING MIC INPUT.................................................................................................... 6
TROUBLESHOOTING ........................................................................................................................ 7
SPECIFICATIONS ................................................................................................................................ 8
TABLE OF CONTENTS
Limited Warranty
This Limited Product Warranty is provided by BriteLite Enterprises. BriteLite
warrants to Customer that the product is free from defects in materials and
workmanship under normal use during the Warranty Period of 90 days for parts
and 1-year labor. If the product fails to conform to the warranty then BriteLite
or its authorized service will either repair or replace any nonconforming
product, provided that Customer gives notice of noncompliance within the
Warranty Period to BriteLite by emailing [email protected] or calling
310-363-7110 (Mexico customers can call 0155 4624 0251). Please retain the
original dated receipt as evidence of proof of purchase.
Please do not return the product to the dealer or place of purchase.
Contact BriteLite directly for warranty support.
Telephone: (888)604-8881
Troubleshooting
No Power
•
First check to make sure the speaker is plugged in to a live AC outlet.
•
Make sure the POWER switch is on.
No Sound
•
Make sure input LEVEL control turned up.
•
Make sure signal source is working and the connecting cables are in good shape and
securely connected at both ends. Make sure the output volume control on the mixing
console is turned up.
•
Make sure the preamp or mixer does not have a Mute button engaged.
Bad Sound – Noise - Humming
•
If the sound is loud and distorted, verify that the levels are set properly on the speaker
and mixing console.
•
Make sure all connectors are secure and they are plugged in to the proper connecter
(i.e., Mic cable plugged in to MIC input, Line level source plugged in to Line Level Input.
•
It is a good idea to periodically clean all electrical connections with a non-lubricating
electrical contact cleaner.
•
Make sure none of the signal cables are routed near AC cables, power transformers or
other electrical power cords.
•
If humming occurs, turn the LEVEL control of the speaker all the way down. If the
noise disappears, its coming from the signal source. If not, try disconnecting the cable
connected to the INPUT jack. If the noise disappears, it could be a ground loop, the
following ideas:
o Use balanced connections throughout your system for best noise rejection. (XLR
cables, balanced jacks; RCA cables are not balanced)
o Whenever possible, plug all the audio equipments power cords into the same outlet.
o The hum may appear when using an unbalanced source (CD player, iPod, etc.). You
can use an RCA to XLR adapter to turn an unbalanced cable to a balanced cable.
o If the hum persists, try removing components one at a time from the back of the
mixer and check each for hum. Reducing the Bass or Treble levels may reduce
humming.
Care and Maintenance
Your active speakers will provide many years of reliable service if you follow these
guidelines:
•
Avoid exposing the loudspeaker to moisture. If they are set up outdoors, be sure they
are under cover if you expect rain.
•
Avoid exposure to extreme cold. If you must operate loudspeakers in a cold environ-
ment, warm up the voice coils slowly by sending a low-level signal through them for
about 15 minutes prior to high-power operation.
•
Use a dry cloth to clean the cabinets. Only do this when the power is turned off.
•
Avoid getting moisture into any of the openings of the cabinet, particularly where the
drivers are located.
-2-
-7-
