EDISON Professional Party System Drum, Instruction Manual

Page: 9 / 11

Connecting a microphone
-Insert the cord of the microphone supplied into the MIC plug on the top of the
speaker.
-Use the MIC/GT volume knob to select the desired microphone volume.
-Use the MIC ECHO knob to set any desired echo sound effect for the microphone.
Line in
Separately from the AUX connection on the top (3.5 mm cinch), the AUX IN connection
(cinch) on the back of the device offers another option for connecting an external
audio playback device to the party speaker.
-Insert the cinch connection cord to the AUX IN connections on the back of the
device. Please note the colour markings and the L (left) and R (right) labels.
-Press the MODE button several times until you see AUX in the display. The audio
signal from your external device will now be played back.
The track playback and volume settings are controlled via the external device.
Line out NL
You can connect an external amplifier (television, recording device, sound bar, active
speaker etc.) to the party speaker via the LINE OUT connection.
-Insert the cinch connection cord to the LINE OUT connections on the back of
the device. Please note the colour markings and the L (left) and R (right) labels.
DO’S and Don’ts
Read the following recommendations before using the speaker. Following these you
will be able to enjoy the product for many years.
. Don’t use abrasive cleaning solvents to clean the speaker.
. Do not expose the speaker to extremely high or low temperature as this will shorten
the life of electronic devices, distort certain plastic parts.
. Don’t attempt to disassemble the speaker as it may get damaged if you are not
professional.
. Do not expose the speaker to heat or fire. Avoid storage in direct sunlight.
. Do not subject the speaker to mechanical shock.
. Do not add any fluids or solids to your speaker.
. Do not use the speaker if it has been damaged in any way,