9
10
Truck Simulator
Electric start
Turn off the TVs.
OFF
Shut down the computer.
The driver can leave the simulator.
Once the computer is off and the screens are in stop mode, then
switch off the differential switch on the electrical panel.
OFF
Ensure that no one is near the simulator when the motion is base
is getting in its initial position.
Lock the electric panel access door.
Exit the software via the tablet PC. Please see the procedure in
Software User Guide.
Truck Simulator
Turn off the simulator
Turn on the 3 TVs.
ON
Check that the tablet is fully charged, otherwise charge it.
Start the PC via the blue switch button, at the right side of the
steering wheel.
Before starting the program, first create a training session.
Please see the procedure in Software User Guide.
Launch the software from the Tablet PC and start exercises.
The driver is now able to start the training.
Before to start the devices: Please open the top flap of the front cover and
check out the circuit breaker position. It must not be in the low position,
otherwise please rise the circuit breaker(s) in the high position.
