After installation, lock the
castor-wheels of the simulator
and TV standers.
Adjust the TV Stander’s rails and
engage them in the 4th position
at the top.
Remove 2 wooden
board at the front and
back of the simulator
Connect power and video cables
according the stickers
Unscrew the 2 upper bolts slightly
and completely remove the 2 lower
bolts, set up the TV, screw all the
bolts tight again
Be care when unpacking TVs.
Fix them with the bolts
(they are delivered and
pre-installed on the TV’s).
3
4
Position the screens as on plan below:
Truck Simulator
Setting up
