Edirol V-440HD, Owner'S Manual

Page: 25 / 92

25
Basic Operation
Moving the Cursor and Selecting
Rotate the VALUE knob to move the cursor up and down. The
parameter at the cursor position flashes, indicating that the
parameter is selected. When selecting numerical or other parameter
values, change the value at the cursor position.
Confirming Parameter Selections
Move the cursor to the desired parameter, and confirm selection of
the parameter by pressing the ENTER button. When the parameter is
selected, the cursor shifts to the next lower line.
Saving Settings Selected in the
Menu
Settings are saved in the V-440HD’s internal memory by pressing the
MENU button a number of times until the menu is closed.
Returning the Settings Made in the
Menus to Their Initial Values
To restore the factory preset values of the menu, perform the
following procedure.
Returning All Settings to the Original Factory
Settings
Select “15. Factory Reset” from the menu; all settings are returned to
the original factory presets.
Restoring the Settings for Individual Items
Select “Reset” for the desired item in the menu; the settings for that
item are returned to the original factory presets.
You can easily open parameters corresponding to buttons in the
menu by holding down the MENU button and pressing the button
for the corresponding settings parameter.
Operation of the parameter indicated with the shortcut is the same
as in the normal menu.
Shortcuts are used with the following buttons.
Double-Clicking Button to Open
Related Menu
When “16. Double Click Short Cut” under “13. SYSTEM” in the
menu is set to ON, you can open the related menu by double-
clicking a button.
The V-440HD interprets pressing of the same button more than
once within 0.2 seconds as double-clicking.
To use this function to close a menu that has been called up,
double-click the button used to call up the menu once again.
When using the “Memo” function described on p. 24 to set the
display of the menu in the HD/RGB output, proceed slowly,
allowing at least 0.2 seconds to elapse after the moment you
press the V-440HD’s buttons.
Note that pressing the buttons too soon will cause the menu to
appear in the HD/RGB OUT.
Menu Operations
MENU
Button VALUE
Knob
ENTER
Button
MENU
Button VALUE
Knob
ENTER
Button
Shortcuts to the Menu Parameters
Button name Parameter displayed by Shortcut Related
Page
SD IN Button 1–4 7. SD Input (p. 61) p. 29
HD/RGB IN Button1–4 2. HD/RGB Input (p. 59) p. 27
OUTPUT FORMAT Button 1. HD/RGB Output (p. 58) p. 26
OUTPUT FADE Button 1. HD/RGB Output (p. 58) p. 26
P in P PATTERN Button (SD) 1–5 8. SD PinP (p. 62) p. 39
P in P PATTERN Button (HD/
RGB) 1–5 3. HD/RGB PinP/Zoom (p. 60) p. 33
KEY ON Button (SD) 9. SD Key (p. 62) p. 41
KEY ON Button (HD/RGB) 4. HD/RGB Key (p. 60) p. 36
TRANSITION Button (SD)
* WIPE PATTEN1–6 10. SD Wipe Select (p. 62) p. 38
TRANSITION Button (HD/RGB)
* WIPE PATTEN1–6 5. HD/RGB Wipe Select (p. 61) p. 31
SHIFT Button * See p. 24 p. 24