manualshive.com logo in svg

Edirol V-440HD, Owner'S Manual, Page: 29 / 92

Share
Download
Edirol V-440HD Owner'S Manual Download Page 29

29

Input and Output Settings

Fixed Aspect: Crop

When “Fixed Aspect: Crop” is selected, the aspect ratio of the input 
video is maintained, and the images are sized to fit within the screen 
(refer to figure below). However, if the aspect ratio of the input 
video differs from the output aspect ratio, a portion of the video 
image is cropped, and the cropped portion is not displayed.

Manual

In cases where you are unable to achieve the optimal aspect ratio 
using either “Full Scale,” “Fixed Aspect: Letter,” or “Fixed Aspect: 
Crop,” use “Manual” in “5. Scaling Type” to adjust the aspect ratio 
manually. After selecting “Manual” with the procedure described on 
p. 28, press the MENU button and adjust the horizontal and vertical 
dimensions with “6. Manual X Scale” and “7. Manual Y Scale” and 
adjust the position with the “8. X Position” and “9. Y Position” 
settings.

Although the SD input is in a fixed format, there may be differences 
in the type of device used or physical differences, and it may be 
necessary to set each input individually.

Make the SD video settings in the menu with “7. SD Input.” In “7. SD 
Input,” you can select from the SD Channel 1–4, and make settings 
the parameters listed below.

*

For more on the menus, refer to “Menu Operations” (p. 25).

*

To quickly go to the Input settings menu, hold down the MENU 
button and press any of the SD IN buttons 1–4.

About SD Input

The V-440HD is compatible with the following SD signal formats.

• NTSC

59.94 Hz

Composite video format

S-Video format

• PAL

50 Hz

Composite video format

S-Video format

Select either NTSC or PAL for use with the V-440HD. For 
instructions on setting the SD signal format to be used, refer to 
“Switching Between NTSC and PAL” (p. 49).

4:3

NTSC / 480i

PAL / 576i

1024 x 768

800 x 600
640 x 480

4:3 (Letterbox)

NTSC / 480i

PAL / 576i

4:3 (Squeeze)

NTSC / 480i

PAL / 576i

16:9

1080i

720p

Input

Output

Setting the SD Input

Settings

7. SD Input Settings Parameters

SD InputSelect

Selects S-Video or composite for the SD input

SD Brightness

Brightness adjustment

SD Contrast

Contrast adjustment

SD Saturation

Saturation adjustment

SD Hue 

Hue adjustment

SD Sw Enable

Selects Enable or Disable for the selected channel 
button

SD Reset

Resets the above settings to the original factory 
settings

Inputting Analog Component SD Video

To input SD video to the V-440HD as analog component video, 
input to the HD/RGB IN BNC connectors. In this case, the input 
SD video is handled in the HD/RGB section.

With analog component input, no interlace to progressive 
conversion is performed. We recommend that a progressive 
signal (480p/576p) be employed for the SD video input.

Summary of Contents for V-440HD





























































































Reviews:

No comments