59
Menu Parameters
Settings for the input from the HD/RGB IN connectors are made here.
*1 Cannot be set in HD/RGB Channel A/B. Parameter numbers are in sequence, with these parameters omitted.
*2 Enabled when Format Auto Detect is set to Manual.
*3 Enabled when Pre Scaling Mode is set to Manual.
*4 Enabled when Scaling Type is set to Manual.
About the Input Video Aspect Ratio
The parameter “5. Scaling Type” above is initially set to “Full Scale.” With this setting, the aspect ratio of the input video is
automatically adjusted to conform to the aspect ratio of the HD output or RGB output. For example, since HD video has an aspect
ratio of 16:9, input video with an aspect ratio of 4:3 (such as SD video and RGB video) is stretched from side to side. If you do not
want to have the input video aspect ratio changed, select “Fixed Aspect: Letter” or “Fixed Aspect: Crop” for “5. Scaling Type.”
*
For more detailed information, refer to “About the Input Video Aspect Ratio” (p. 28).
About the HD/RGB Input Format
The V-440HD inputs component and RGB video in the formats shown in the following table.
*
RGB units are [horizontal (pixels)
x
vertical (lines) / frame rate (Hertz)].
2. HD/RGB Input
Parameters
Explanation
Values
2- 1.
HD/RGB Ch A/B
Sets input for SD section video input to HD/RGB
* Refer to “HD/RGB Input Parameters.”
However, content appended with *1 does
not appear.
2- 2.
HD/RGB Ch 1
Sets video input to Channel 1 of the HD/RGB IN connectors
* Refer to “HD/RGB Input Parameters.”
2- 3.
HD/RGB Ch 2
Sets video input to Channel 2 of the HD/RGB IN connectors
* Refer to “HD/RGB Input Parameters.”
2- 4.
HD/RGB Ch 3
Sets video input to Channel 3 of the HD/RGB IN connectors
* Refer to “HD/RGB Input Parameters.”
2- 4.
HD/RGB Ch 4
Sets video input to Channel 4 of the HD/RGB IN connectors
* Refer to “HD/RGB Input Parameters.”
HD/RGB Input Parameters
Parameters
Explanation
Values
1.
Format Auto Detect
Function automatically distinguishes input *1
Auto, Manual
2.
Input Format
Selects input format *1*2
* Refer to “About the HD/RGB Input Format”
3.
Pre Scaling Mode
Switches scaling adjustment function on and off
Auto, Manual
4.
Manual Pre Scaling
Adjusts scaling ratio when full scaling used *3
90.0–110.0%, Auto
5.
Scaling Type
Scaling method
Full Scale. Fixed Aspect: Letter, Fixed Aspect:Crop, Manual
6.
Manual X Scale
Adjusts the horizontal expansion ratio *4
0010%–1000%, Auto
7.
Manual Y Scale
Adjusts the vertical expansion ratio *4
0010%–1000%, Auto
8.
X Position
Fine adjustment of the horizontal start position
-200– +200
9.
Y Position
Fine adjustment of the vertical start position
-200– +200
10.
Brightness
Brightness adjustment
-64– +64
11.
Contrast
Contrast adjustment
-64– +64
12.
Saturation
Saturation adjustment
-64– +64
13.
Red
Red adjustment
-64– +64
14.
Green
Green adjustment
-64– +64
15.
Blue
Blue adjustment
-64– +64
16.
Frequency
Fine adjustment of the Sampling Frequency *1
-200– +200
17.
Phase
Fine adjustment of the Sampling Phase *1
-64– +64
18.
Sw Enable
Selects Enable or Disable for the selected channel
button
Off, On
19.
Input Ch Reset
Resets the above settings to the original factory
settings
—
Component
RGB
480/60p
1080/50i
640 x 480/60
1024 x 768/75
576/50p
720/60p
640 x 480/75
1280 x 768/60
1080/60i
720/50p
800 x 600/60
1280 x 768/75
800 x 600/75
1280 x 1024/60
1024 x 768/60
