manualshive.com logo in svg

Edirol UM-2EX, Owner'S Manual, Page: 25 / 76

Share
Download
Edirol UM-2EX Owner'S Manual Download Page 25

 

25

 

10.

 

Click 

 

Test Setup

 

. 

The shape of the mouse 
cursor changes

.

 

11.

 

Click the area shown in 
the illustration. If the 
corresponding MIDI 
OUT indicator of the 
UM-2EX blinks, the 
settings have been made 
correctly.

 

12.

 

Click 

 

Test Setup

 

 and 

complete the 
confirmation.

 

13.

 

Close the 

 

Audio MIDI Setup

 

 dialog box.

11

Click the icon

10

, 

12

Test Setup

When using the UM-2EX with your sequencer software

Before using the UM-2EX with your sequencer software, please note the following points.
• Connect the UM-2EX to your Macintosh before you start up your sequencer software.
• Do not disconnect the UM-2EX from your Macintosh while your sequencer software is running. 

Quit your sequencer software before you disconnect the UM-2EX from your Macintosh.

• The UM-2EX will not operate in the Mac OS X Classic environment. Use the UM-2EX when 

the Classic environment is not running.

UM-2EX_multi1.book 25 ページ ２００５年１１月１日　火曜日　午後３時４７分

Summary of Contents for UM-2EX













































































Reviews:

No comments