32
Recording
Here’s how to record from an audio device connected to the R-4’s combo input jacks.
fig.LINE-1.eps
●
Connections
Connect your audio device to the combo input jacks.
You’ll need to use phone-jack audio cables (sold separately).
* When connection cables with resistors are used, the volume level of equipment connected to the combo input jacks
may be low. If this happens, use connection cables that do not contain resistors, such as those from the Roland PCS
series.
●
Input level select switch
Set to
LINE
.
●
Phantom power switch
Turn this
OFF
.
fig.input-analog.eps
●
System settings
Press the R-4's
[SYSTEM] button
.
In
1 Recording Setup
, set
Input Select
to
Analog
.
Set the
Rec Mode
to
STEREOx1
.
Set the other items in
1 Recording Setup
as appropriate for the
recording you want to make.
* For more about system settings, refer to
Recording analog audio
Phantom power
is not required,
so turn this
OFF
Set to LINE
Audio playback system
(CD player, record player, etc.)
Raise slowly
Set to minimum
if not used
R
L
Adjust the input level
R-4_e.book 32 ページ ２００５年２月１０日 木曜日 午後３時３６分
