28
Introduction to Use of the PR-80
4.
Playing Back the Clip
The area in the Play Mode screen where the thumbnail video images are shown is called the palette,
and each of the video images is called a clip. You select the clip to be played back from the palette.
You can also switch and play video from other palettes.
fig.playmode02.eps
Click on a clip with the mouse to start playing the clip. Clicking on the transport control allows you
to start and stop playback, and to play back clips one frame at a time.
You can check the images being played back with the video output monitor.
Clicking on the palette list with the mouse switches the palette.
You can work with the controls in the upper right of the screen to select from a number of different
playback methods and add effects.
• Play Mode Screen
→
• Using the Mouse to Play Back Clips
→
• Using the Keyboard to Play Back Clips
→
• Viewing the Video Output Monitor
→
• Switching the Palette
→
• Setting the Switching Effects
→
• Turning Loop Playback On and Off
→
• Setting the Palette’s Loop Mode
→
• Making Clip Loop Mode Settings
→
• Setting Projects to Play Automatically When Loaded
→
• Setting the Scheduler
→
Select a palette
Program output monitor
Image effects
Palette (select a clip)
Transport control
PR-80_e.book 28 ページ ２００５年１月６日 木曜日 午後９時２２分
